Oldsmobile’s 442 Made 370 HP in 1970 — A Restomod Nearly Doubled It With a 650-HP LT4

A Bakersfield shop pulled the original drivetrain out of a 1970 Oldsmobile Cutlass 442 and dropped in a supercharged LT4 making roughly 650 horsepower. The body, color, and cabin stayed period-correct — only the heart changed. Here’s how that stacks up against the real W-30’s factory numbers.

Video: Autotopia LA on YouTube.

Oldsmobile's 442 Made 370 HP in 1970 -- A Restomod Nearly Doubled It With a 650-HP LT4

Oldsmobile’s own W-30 package pushed the 1970 442 to 370 horsepower straight from the factory, which made it one of the hardest-hitting cars on the showroom floor that year. A shop in Bakersfield just proved that number is nowhere near this car’s ceiling. Builders at Ironworks Speed & Kustom pulled the original drivetrain out of a 1970 Oldsmobile Cutlass 442 and dropped in a supercharged LT4 — the same family of engine GM has used in some of its quickest modern performance cars — and walked away with roughly 650 horsepower. The body panels, the dash, and the unmistakable 442 shape never changed. Only what’s under them did.

Inside Ironworks’ 650-Horsepower Build

The feature comes from AutotopiaLA, a channel that profiles high-end builds out of Southern California on a regular schedule. This episode follows Roger and his team at Ironworks Speed & Kustom in Bakersfield as they walk through a 1970 Oldsmobile Cutlass 442 finished with a factory-style stance and color, then reveal what’s actually powering it: a supercharged LT4 V8 making somewhere around 650 horsepower, built to drive as easily as it shows.

⚑ Featured Gear
Start Car Conversations →

As an Amazon Associate I earn from qualifying purchases.

What stands out in the footage isn’t just the power figure. Commenters who follow Ironworks’ other builds point out that the shop has a habit of keeping the exterior restrained while hiding serious engineering underneath — several viewers compared this 442 favorably to Chevelles and Camaros they’d seen from the same team, with more than one calling the Oldsmobile the most underrated car the channel has featured. One owner in the comments, who ran a 455/4-speed 442 of his own decades ago, said the sound alone from this LT4 build was on another level entirely.

Why the 442 Needed a Reputation to Protect

The 442 name dates back to April 1964, when Oldsmobile introduced it as a performance option on the F-85 and Cutlass to answer Pontiac’s new GTO. The “4-4-2” badge referred to the package’s four-barrel carburetor, four-speed manual transmission, and dual exhaust — paired with a 330-cubic-inch V8 rated at 310 horsepower. The formula didn’t stay literal for long. By 1965, Oldsmobile had redefined the first “4” to mean the new 400-cubic-inch engine, since automatic and three-speed manual transmissions were now available alongside the four-speed. A tri-carb setup arrived in 1966, and by 1968 the badge had been simplified to just “442,” even as Oldsmobile’s own paperwork kept using the hyphenated version internally.

1970 marked a turning point for the whole model line. General Motors lifted its corporate ban on engines larger than 400 cubic inches in intermediate cars, and Oldsmobile answered immediately with a 455-cubic-inch V8 for the 442. The standard version was rated at 365 horsepower, while the W-30 package — the one built for buyers who wanted the most aggressive 442 money could buy — stepped that up to 370 horsepower and 500 lb-ft of torque. W-30 cars came with a fiberglass hood, functional ram-air induction scoops, an aluminum intake manifold, a specific high-performance camshaft, and low-restriction exhaust. Oldsmobile never built many of them; most published estimates put 1970 W-30 production somewhere in the 2,500-to-2,600 range, though exact factory figures are inconsistently documented and some references cite very different totals, which is part of why surviving numbers-matching W-30s command serious money today.

Why a Modern LT4 Was the Right Engine to Borrow

The LT4 isn’t a random swap candidate. It’s GM’s supercharged 6.2-liter V8, the engine the automaker has used in the sixth-generation Camaro ZL1, the Cadillac CTS-V, and the C7 Corvette Z06, with factory ratings climbing as high as the mid-600-horsepower range depending on the application. That means the roughly 650 horsepower Ironworks quotes for this 442 lines up with what a well-tuned, factory-based LT4 is capable of producing without needing exotic aftermarket internals — it’s a realistic number for the engine family, not an inflated one. It’s also roughly 280 horsepower more than Oldsmobile’s own W-30 ever managed in 1970, and almost double the base 442’s 365-horsepower rating the same year, which is the kind of gap that only became possible once supercharging and electronic fuel injection caught up with what builders had always wanted from a big GM V8.

The build also illustrates why restomods built around GM’s own modern small-block family have become so common on cars like this: the LT4 bolts into classic GM chassis with far less custom fabrication than a swap from an unrelated engine architecture would require, while still delivering nearly double the output of the best the factory ever offered in a 442. Several commenters pegged the total investment in parts alone at a substantial six-figure sum, though that figure comes from viewers speculating in the comments rather than anything Ironworks has published, so it’s worth treating as an estimate rather than a confirmed cost.

The supercharger is the detail that separates an LT4 from its naturally aspirated LT1 sibling, and it’s the reason the horsepower gap between this build and the factory W-30 is so wide. A 1970 455 relied on cubic inches and a long-duration cam to make its power; the LT4 gets there with forced induction, direct injection, and a rev range the original short-block was never designed to see. Dropping one into a chassis built fifty-plus years earlier means re-engineering the engine mounts, the cooling system, the wiring, and usually the transmission tunnel, which is why a swap like this takes a dedicated shop rather than a weekend in a home garage.

What a Real 442 Buyer Should Know Today

For anyone shopping the real thing rather than a restomod, documentation is everything on a 1970 442. Because the W-30 package was optional and relatively rare, verifying a car’s build sheet, the original Protect-O-Plate, and matching engine codes matters more than it does on more common muscle cars from the same era, where survivor counts are higher and fakes are less common. Convertibles are the scarcest body style by a wide margin, and a numbers-matching W-30 convertible with the four-speed is treated by most collectors as the top of the model’s hierarchy. Buyers should also expect rust in the usual GM A-body spots — lower quarters, trunk floors, and frame rails — since these cars were daily drivers for decades before anyone treated them as investments.

That gap between what a stock numbers-matching 442 commands and what a documented restomod like this one can sell for is part of why shops such as Ironworks have found a steady audience. A correct, unmolested W-30 appeals to buyers chasing originality and resale value tied to factory specs. A build like the one in this video appeals to a different kind of owner entirely — someone who wants the silhouette and the badge, but with modern reliability, modern brakes, and power the factory never offered at any price. Neither approach is replacing the other; they’re simply answering different questions about what a fifty-plus-year-old car should be able to do today.

A 442 That Still Looks Like 1970

What keeps this build from feeling like a different car wearing a 442 badge is restraint. The stance, the color, and the cabin all read as period-correct at a glance, which is exactly the contrast Ironworks built the car around: a shape Oldsmobile buyers would recognize instantly, carrying far more power than Oldsmobile itself was ever allowed to put under that hood in 1970.

Watch the full video above and let us know your thoughts in the comments.