Shark Inspired It? The Designer Behind 4 American Icons

Shark inspired it? That is where one of the best known sports cars in American history started, and it is only the first surprise in a story that runs through four cars: the 1963 Buick […]

Shark inspired it? That is where one of the best known sports cars in American history started, and it is only the first surprise in a story that runs through four cars: the 1963 Buick Riviera, the 1963 Corvette Sting Ray, the 1968 Corvette and the 1970 Chevrolet Camaro. Each of them carries the fingerprints of one man, Bill Mitchell, who ran design at General Motors for 19 years. If you are new to muscle cars, this is a good way in. Cars are easier to understand when you know who drew them and what they were trying to prove.

Watch the video above for the short version, then read on for the detail on each car. Everything here comes from published histories of the models and of Mitchell himself. Where two histories disagree, we say so instead of picking the better story, because this is an audience that checks the facts, and it should.

Who was Bill Mitchell?

William Leroy Mitchell was born in 1912, the son of a Buick dealer, and he learned to sketch cars as a boy. After art school he took a job at an advertising agency in New York, where he drew layouts, including advertisements for MG cars. At the agency he met the Collier brothers, who had founded the Automobile Racing Club of America, and Mitchell became the club’s official illustrator. Those sketches reached Harley Earl, the head of General Motors’ Art and Color Section, and Earl recruited him on December 15, 1935.

⚑ Featured Gear
Start Car Conversations →

As an Amazon Associate I earn from qualifying purchases.

The climb was steady. In 1936 Mitchell became chief designer of the new Cadillac studio. In May 1954 he became Director of Styling under Earl. In December 1958, when Earl reached the company’s mandatory retirement age of 65, the 46 year old Mitchell took over as Vice President of Styling. He held the job for 19 years and retired in July 1977 after his 65th birthday. His own style was a break from the chrome and fins of the Earl years. He promoted what he called the “sheer look,” a cleaner, more aerodynamic shape that dropped away from the windows without a heavy shoulder.

He had opinions, and he shared them. About small cars he once said, “Small cars are like vodka. Sure people will try them out but they won’t stay with them.” After he retired he called the fourth generation Corvette “bland.” He died in 1988 at the age of 76, and the National Corvette Museum inducted him into the Corvette Hall of Fame in 1998. Here are four of the cars that help explain why.

1963 Buick Riviera: the Rolls-Royce that became a Buick

1963 Buick Riviera photographed at a car show
1963 Buick Riviera, photo by Vetatur Fumare (CC BY-SA 2.0) via Wikimedia Commons

In the late 1950s General Motors had no answer to the Ford Thunderbird, which had grown from a two seater into a hugely popular four passenger personal car, or to the Chrysler 300C. The company’s solution began as an experimental Cadillac, the XP-715, nicknamed the “LaSalle” after a former GM brand. Its angular look was reportedly inspired by a custom bodied Rolls-Royce that Mitchell saw on a trip to London. He later said that “knife edged” styling was what he wanted, only lower. Stylist Ned Nickles drew it. One caution for the trivia fans: a popular story puts Mitchell in Paris when the idea came to him, while the Riviera’s own history says London. Accounts differ on the city, but both agree on the Rolls-Royce spirit.

Cadillac passed on the project in 1960, and GM threw it open to its other divisions. Buick, desperate to revive flagging sales, won the competition by hiring the McCann-Erickson advertising agency to build its presentation. The design was accepted on Christmas Eve 1961. Mitchell referred to that day as perhaps the greatest moment of his life, and he had reason, because the 1963 Corvette design was accepted by Chevrolet on the same Christmas Eve.

The production Riviera was introduced on October 4, 1962, as a 1963 model. Its bodyshell was unique to Buick, which was unusual for a General Motors car, and it wore the “Coke bottle” look, with a tapered middle between flaring fenders. A 325 horsepower, 401 cubic inch Buick “Nailhead” V8 was the only engine at first, fitted with dual exhaust, and a turbine drive automatic was the only transmission. Buick later announced an optional 340 horsepower, 425 cubic inch version of the Nailhead. The base price was $4,333.

The praise was remarkable. Jaguar founder Sir William Lyons said Mitchell had done a “very wonderful job,” and Sergio Pininfarina called the Riviera one of the most beautiful American cars ever built. The car has since earned Milestone status from the Milestone Car Society. For a first car on this list it makes the point well: a muscle era designer did not only draw loud cars. He also drew quiet, elegant ones, and the same eye sat behind both.

1963 Corvette Sting Ray: the shark and the split window

1963 Chevrolet Corvette Sting Ray photographed at a car show
1963 Chevrolet Corvette Sting Ray, photo by MercurySable99 (CC BY-SA 4.0) via Wikimedia Commons

The Sting Ray starts with a racer. In 1959 Mitchell designed the radical Sting Ray Special race car, and its shape fed directly into the next Corvette. The history lists several other sources of inspiration for the new car: GM’s Q-Corvette exercise of 1957, the CERV I concept, a Jaguar E-Type that Mitchell owned and drove often, and a mako shark. How Mitchell met the shark depends on which history you read. One says he caught it while deep sea fishing, and another says he met it while skin diving in the Bahamas. Either way, the shark is part of the car’s story, and the name came from the racer.

The program was directed by Ed Cole, Zora Arkus-Duntov and Mitchell, who dubbed the model “Sting Ray” after the earlier race car. Styling was led by Larry Shinoda, and Pete Brock was instrumental too. For the first time in Corvette history, wind tunnel testing influenced the shape. Both body styles were tested as 3/8 scale models at the Caltech wind tunnel. The new car also carried nearly twice as much steel support in its central structure as the 1958 to 1962 Corvette, yet it weighed slightly less than the old roadster because the fiberglass was made thinner.

Then there is the split rear window. The 1963 coupe had a ridge that ran down the roof and split the rear glass into two panes. The split window is usually credited to Mitchell, who claimed to have been inspired by a Bugatti Atlantique coupe. The history adds a twist: the idea actually predated the Sting Ray, because Harley Earl had used it on his Oldsmobile Golden Rocket show car and in his own design studies for the new Corvette. Mitchell loved it. Duntov disliked it because of rear visibility, and for 1964 it was replaced with a single piece of arched glass. That makes the 1963 the only C2 hardtop with a split rear window.

Under the hood, every 1963 car had a 327 cubic inch V8, rated at 250 horsepower as standard, with optional versions at 300, 340 and 360 horsepower. The most powerful one used Rochester fuel injection. The special Z06 performance package cost $1,818.45 on top of the $4,252 base coupe price. The 1963 car also handled far better than the Corvette before it, which is why the shark story is more than a fun fact. The shape and the chassis arrived together.

1968 Corvette: the shark that a toy gave away

1968 Chevrolet Corvette photographed at a car show
1968 Chevrolet Corvette, photo by ZidaneHartono (CC BY-SA 4.0) via Wikimedia Commons

If the Sting Ray was the first shark, the 1968 Corvette was the second. The third generation Corvette was patterned on the Mako Shark II show car, which Larry Shinoda designed under Mitchell’s direction. The Mako II was started in early 1964. When the mid-engine layout was abandoned, the car went to Chevrolet Styling under Dave Holls, where Henry Haga’s studio adapted it to the existing Stingray chassis. The concept car was later renamed the Manta Ray. The production car also adopted a “sugar scoop” roof with a near vertical rear window, and the rear window and the roof section above the seats were designed from the start to be removable.

The reveal did not go the way General Motors planned. GM tried hard to keep the new shape secret, but Mattel’s Hot Wheels line arrived several weeks before the car’s unveiling, and one of the models was a GM authorized “Custom Corvette” based on the 1968 car. Collectors of toys and of Corvettes still enjoy that story. The history calls it an unorthodox and unintended introduction.

The 1968 body and interior were completely new, with a notchback coupe and removable T-top roof panels, concealed headlights operated by engine vacuum, and a fresh air system called “Astro Ventilation” in place of side vent windows. The chassis, the independent suspension and the four wheel disc brakes carried over from the second generation. The standard engine was the L30, a 327 cubic inch small block rated at 300 horsepower, with the 350 horsepower L79 above it. Several 427 cubic inch big blocks were available too, including the 390 horsepower L36, the 400 horsepower L68 and the 435 horsepower L71. Together the big blocks made up nearly half of the cars. The 1968 list price was $4,663.

One more fact for the group chat. The Stingray name came back in 1969, this time as one word, and it stayed through 1976. In 1969 General Motors leased three special edition Corvette Stingrays to the Apollo 12 astronauts Pete Conrad, Richard Gordon and Alan Bean for one dollar a year, in a gold and black paint scheme that Bean chose. A shark leaked by a toy, then leased to astronauts: not a bad run for one design.

1970 Chevrolet Camaro: the car that carried the style forward

1970 Chevrolet Camaro Z28 photographed at a car show
1970 Chevrolet Camaro Z28, photo by Xnatedawgx (CC BY-SA 4.0) via Wikimedia Commons

The last car shows how long Mitchell’s influence lasted. His biography lists the 1970 to 1981 Chevrolet Camaro among the designs he created or influenced, and the second generation Camaro ran across that exact span. It was introduced in the spring of 1970. Build information was released to the assembly plants in February of that year, which is why some people call it a 1970 and a half model, although all of them are 1970 models. It was longer, lower and wider than the first generation Camaro, and the convertible was gone. GM engineers have said the second generation is much more of a driver’s car than the first.

Buyers could choose the base model, the Rally Sport appearance option with its distinctive nose and bumper, a Super Sport performance package, or the Z/28. The Z/28 package was priced at $572.95 and brought the new LT-1, a 350 cubic inch V8 rated at 360 horsepower and 380 pound feet of torque, built as a Corvette engine from the ground up. The 1970 model year is generally regarded as the most desirable of the early second generation Camaros, because emissions controls reduced performance in the years that followed.

Those years were rough. A 67 day corporate wide strike at GM coincided with the introduction of the 1971 models, interest in pony cars was dropping, and skyrocketing insurance rates hurt high performance cars. There were rumors that the Camaro might be cancelled after 1972. It survived, and the Z28 came back as its own model in the spring of 1977.

What the four cars tell a newcomer

Put the four cars side by side and a pattern shows up. A Buick that started with a Rolls-Royce, a Corvette that started with a shark and a racer, a second Corvette that a toy revealed, and a Camaro that carried the look into the seventies. None of them were designed by a committee that wanted to please everyone. They were shaped by one strong personality with a clear idea of what a car should look like, and a team of designers, including Nickles, Shinoda, Haga and Holls, who made the idea real.

It is also a lesson in reading the stories you hear about cars. The split window is credited to Mitchell, yet it predates the Sting Ray. The shark is real, yet the histories disagree on how he met it. The Riviera idea came from a Rolls-Royce, yet the city depends on who tells it. A good fan holds the fun version and the careful version in the same hand.

If you want to see these cars in person, start at a local car show and look for the details this article mentioned: the split rear glass on a 1963 Sting Ray coupe, the knife edged lines of a Riviera, the sugar scoop roof line of a 1968 Corvette, and the Z28 badge on a 1970 Camaro. Mitchell’s last design at General Motors was the 1977 Pontiac Phantom concept, which now sits in the Sloan Museum collection. Which of his four looks best to you? Tell us in the comments, and follow Muscle Car Fan for more stories behind the cars.

YouTube: the same video is queued for the Muscle Car Fan YouTube channel.

Leave a Reply

Your email address will not be published. Required fields are marked *