 |
A dealer in Greene, Iowa is selling a 1970 Chevelle SS with the one document every collector wants — its factory build sheet. The catch: the engine, transmission, and rear gearing under the hood today have nothing to do with what that sheet describes. Here’s what changed, and why one viewer isn’t sure the swap should have happened at all.
The Chevelle arrived in 1964 with a 220-horsepower 283 and a mission to haul families. Fourteen years later it had produced the highest horsepower figure Detroit ever printed on a factory spec sheet, a 427-powered street car with no badges at all, and 53 NASCAR wins. This is the full arc of Chevrolet’s most contradictory nameplate.
The M-22 ‘Rock Crusher’ behind this 1966 Chevelle SS 396 wasn’t built for comfort — its gear teeth were deliberately cut at a stronger angle that traded a smoother shift for real durability, producing the loud whine that gave the transmission its nickname. Most 1966 Chevelle buyers chose Chevrolet’s simple two-speed Powerglide instead, leaving this heavy-duty manual as a rare, purpose-built option ordered behind the potent L78 396 only a handful of times.
Classic Car Studio compresses a full 1966 Chevrolet Chevelle rebuild into ten fast-paced minutes, but the real story is in the details the footage moves past quickly. Not every SS396 badge that year meant the same engine — Chevrolet offered three distinct versions ranging from a mild 325-horsepower L35 to a solid-lifter 375-horsepower L78 that almost nobody ordered. Understanding which one a given car actually left the factory with is exactly what separates a documented original from one of the many SS396 clones still circulating today.
A twin-turbo, supercharged ‘Vicious Mustang 2.0’ claiming 1,003 wheel horsepower headlines this car show sound compilation from 97robin997, but according to the person who filmed it, that Mustang wasn’t even the loudest car to roll through the lot. The footage also captures a Chevelle SS, a 1967 Eleanor-spec Mustang, and a 1951 Mercury coupe running a modern LS3 V8. Watch to hear which build actually stole the show.
This 1967 Chevrolet Chevelle Malibu wears SS badging on the outside, but the real story is underneath: a frame-off restoration built around a 5.3-liter LS V8, a 4L60E automatic, and a Quick Performance 9-inch rear end, all with just 15,000 miles logged since the rebuild. Listed out of Ubly, Michigan, it’s the kind of restomod that trades numbers-matching originality for a chassis built to keep up with modern traffic. Read on to see what else went into the build.
At the 2026 NHRA Rocky Mountain Nationals in Edmonton, the 3,500-horsepower Yeti Chevelle went head-to-head with Mike Gondziola’s Terminator and Sander Spelt’s Bunker Junker through a full weekend of Pro Modified eliminations. The coverage runs from Thursday test-and-tune through Saturday’s final round. It’s proof that regional Pro Mod racing delivers just as much spectacle as any national event.
Before the 2018 model year, a rendering claiming to reveal a revived three-door Chevrolet Chevelle spread online, complete with invented horsepower figures and a suspiciously plausible price tag. It never happened — Chevrolet never built it, and the Camaro remained the brand’s only performance coupe. Read on to find out what the rumor actually claimed, and why fans wanted a modern Chevelle badly enough to believe it.
Eighteen pro-built classic Chevrolets lined up at Auto Club Speedway for the Super Chevy Muscle Car Challenge, and the smart money was on a Camaro to win the handling-focused competition, the way it usually does. Instead, a 1972 Corvette out-drove every single one of them. Watch the full episode to see how the results played out — and how at least one driver managed to hit a cone anyway.
Looks fade at a stoplight, but sound is what actually sticks with people — and five specific muscle car engines, from Pontiac’s GTO to Dodge’s Challenger R/T, are widely considered to have never been matched by anything Detroit builds today. Watch to hear what made the GTO, 442, Road Runner, Chevelle, and Challenger R/T sound different from everything that came after them.
An $8,500 asking price on a 1969 Chevelle SS 396 barn find sounds like a steal — until a 40-year restoration veteran breaks down exactly what it actually costs to finish, and what the market will actually pay once it’s done. The gap between those two numbers is bigger than most buyers expect. Watch to see the full math and decide whether this one is a deal or a trap.
This 1972 Chevelle wears deep black paint, a tucked stance, and a 555-cubic-inch supercharged big block under the hood — a combination that places it squarely in the Pro Touring movement reshaping classic muscle cars from the chassis up. Builders in this space have pushed similar Chevelles past 700 and even 775 horsepower while keeping the original silhouette intact. Here’s what separates a Pro Touring build from a straight restoration, and why the changes go far deeper than the engine bay.
A 1972 Chevrolet Chevelle gets dragged out of a hay barn and rebuilt from the ground up on PowerNation, with new body panels, an upgraded suspension, and a big-block Chevy engine dropped under the hood. Hosts Marc and Tommy finish the car in a dazzling metallic baby blue before taking it for a payoff drive through the Smoky Mountains. A sharp-eyed viewer — a professional locksmith — even spotted a shortcut the crew missed for the broken trunk lock. The build has become a fan favorite for its patient, drama-free approach to bringing a forgotten classic back to life.
Vanguard Motor Sales took this 1969 Chevrolet Chevelle — stock #5668, documented with over 100 photos and finished in a bold orange that’s winning over commenters — out for a real test drive instead of just a showroom walkaround. It’s a rare, transparent look at how a dealer actually vets a classic before it lists it. See how the Chevelle performs when the pedal goes down.